SC62 เครื่องวัดและควบคุมอุณหภูมิ
หมวดหมู่ : TEMPERATURE & HUMIDITY ,  Controller & Display , 
แบรนด์ : SIPIN
Share
คุณสมบัติ
| Power Input | |
| Power Supply | 90 to 250 VAC, 47–63 Hz ; 11 to 40 VDC / 20 to 28 VAC, 47– 63 Hz |
| Power Consumption | SC22/R22: 8VA, 4W maximum, SC62: 10VA, 5W maximum, SC72/SC82/SC83/SC42: 12VA, 6W maximum |
| Signal Input | |
| Input Type | Thermocouple(J,K,T,E,B,R,S,N,L,U,P,C,D), RTD(PT100(DIN), PT100(JIS)), Current(mA),Voltage(Volts) |
| Resolution | 18 Bits |
| Sampling Rate | 5 Times / Second (200msec) |
| Maximum Rating | -2VDC minimum, 12VDC maximum |
| Temperature Effect | 1.5µV /°C for all inputs except mA input, 3.0µV /°C for mA |
| Remote Set Point Input | |
| Type | Linear Current,Linear Voltage |
| Range | -3mA to 27mA, -1.3V to 11.5V |
| Accuracy | ±0.05 % |
| Input Impedance | Current: 2.5Ω, Voltage:1.5MΩ |
| Resolution | 18 Bits |
| Sampling Rate | 1.66 Times/Second |
| Event Input | |
| No. of Event Inputs | 1 |
| Logic Low | -10V minimum, 0.8V maximum. |
| Logic High | 2V minimum, 10V maximum |
| Output 1 /Output 2 | |
| Type | Relay,Pulsed Voltage,Linear Voltage and Linear Current |
| Relay Rating | 2A,240V AC,200000 Life Cycles for Resistive Load |
| Pulsed Voltage | Source Voltage 5V,Current Limiting Resistance 66Ω |
| Linear Output Resolution | 15 Bits |
| Linear Output Regulation | 0.02% for full load change |
| Linear Output Settling Time | 0.1 Second ( Stable to 99.9%) |
| Isolation Breakdown Voltage | 1000 V AC |
| Temperature Effect | ±0.01% of Span/ °C |
| Load Capacity of Linear Output | Linear Current: 500Ω maximum, Linear Voltage: 10KΩ minimum |
| Alarm | |
| Relay Type | Form A |
| Maximum Rating | 2A,240V AC,200000 Life Cycles for Resistive Load |
| Alarm Functions | Dwell Timer, Deviation Low, Deviation High, Deviation Band Low, Deviation Band High, Process High, Process Low |
| Alarm Mode | Latching, Hold, Normal, Latching/Hold |
| Dwell Timer | 0.1 to 4553.6 Minutes |
| Communication | |
| Interface | RS-485 |
| Protocol | Modbus RTU (Slave Mode) |
| Baudrate | 2.8KBPS to 115.2 KBPS |
| Parity Bit | None, Even or Odd |
| Stop Bit | 1 or 2 Bits |
| Data Length | 7 or 8 Bits |
| Analog Retransmission | |
| Output Signal | 4-20 mA, 0-20 mA,0 - 10V |
| Resolution | 15 Bits |
| Accuracy | ±0.05% of Span ± 0.0025% / °C |
| Saturation Low | 0mA or 0V |
| Saturation High | 22.2mA or 5.55V,11.1V min |
| Linear Output Ranges | 0 - 22.2mA (0 - 20mA/4 - 20mA), 0 - 5.55V (0 - 5V, 1 - 5V),0 - 11.1V (0 - 10V) |
| Control Mode | |
| Output 1 | Reverse (Heating) or Direct (Cooling) Action |
| Output 2 | PID cooling control, Cooling P band 50~300% of PB, Dead band -36.0 ~ 36.0 % of PB |
| ON-OFF | 0.1 - 90.0 (°F ) hysteresis control ( P band = 0) |
| P or PD | 0 - 100.0 % offset adjustment |
| PID | Fuzzy logic modified Proportional band 0.1 ~ 900.0°F, Integral time 0 – 3600 Seconds,Derivative time 0 - 360.0 Seconds |
| Manual Control | Heat(MV1) and Cool(MV2) |
| Auto-tuning | Cold Start and Warm Start |
| Environmental and Physical | |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -40°C to 60°C |
| Humidity | 0 to 90 % RH (Non-Condensing) |
| Mounting | Panel |
| Dimensions (WxHxD) (mm) | 48x48x59 |
| Depth Behind Panel (mm) | 50 |
| Cut Out Dimensions (mm) | 45x45 |
| Weight (g) | 160 |
| Approval Standards | |
| Safety | UL61010-1, CSA 22.2 No.61010-1-12, EN61010-1 (IEC1010-1), RoHS, REACH |
| IP Protection | IP50 for Panel,IP20 for terminals and housing, all indoor use |
| EMC | EN61326 |
ชื่อสินค้า เครื่องวัด และควบคุมอุณหภูมิ
แบรนด์ SIPIN รุ่น SC62
- ใช้สำหรับวัด และควบคุมอุณหภูมิ
- จอแสดงผลแบบดิจิตอล เหมาะสำหรับติดตั้งหน้าตู้คอนโทรล
- ขนาด 48x48x59mm (กว้างxยาวxลึก)
- รับอินพุทได้ทั้ง เทอร์โมคัพเพิ้ล(Thermo couple), อาร์ทีดี(RTD), และกระแส4-20mA (Current)
- สัญญาณเอ้าท์พุทเป็นแบบมี3รูปแบบคือ รีเลย์(Relay), โซลิดสเตทรีเลย์(SSR12-32VDC), กระแสไฟ4-20mA (ระบุตอนสั่งซื้อ)
- ระบบควบคุมอุณหภูมิมี2รูปแบบคือON/OFF และPID+Fuzzy Control สามารถควบคุมอุณหภูมิได้คงที่ และสม่ำเสมอ
- ค่าความเที่ยงตรง 0.05%
- มีฟังก์ชันAlarmเป็นแบบRelay 2A 220VAC
- เหมาะสำหรับงานควบคุมอุณหภูมิ ตู้อบ, อุ่นของเหลว, เครื่องทำความเย็น
การนำไปใช้งาน
Temperature Controller SIPIN SC Series เครื่องควบคุมอุณหภูมิมัลติฟังก์ชั่นรองรับการควบคุมแบบ PID + Fuzzy ออกแบบมาเพื่อใช้งานในอุตสาหกรรมโดยเฉพาะในราคาที่ประหยัดแต่สามารถควบคุมอุณหภูมิได้อย่างมีเสถียรภาพ แม่นยำ โดยสามารถนำไปประยุกต์ใช้งานได้กับเครื่องอบ , เตาอบอุตสาหกรรม , เครื่องทำความเย็นต่างๆ
เงื่อนไขอื่นๆ
Documentation
___________________________________________________________________________________
SC Series DATASHEET Download
___________________________________________________________________________________
SC Series QUICK MANUAL Download
___________________________________________________________________________________
DIMENSION
