Laminar Air Flow Monitoring, Overflow Type , Range 0.1..10m/s, Output 4-20mA , Relay , RS485, Display, eyc-tech , Bi-directional Air Flow Transmitter
หมวดหมู่ : FLOW METER ,  Air flow / Air velocity , 
แบรนด์ : EYC-TECH
Share
| Technical information | |
| Sensor Type | Hot-wire sensor |
| Measuring range | ±(0.00 ... 1.00 m/s) |
| ±(0.00 ... 2.00 m/s) | |
| ±(0.00 ... 10.00 m/s) | |
| Recommended range : 0.00 ... 1.00 m/s for laminar and overflow monitoring | |
| Turndown ratio | 100 : 1 |
| Accuracy | |
| Accuracy (Including hysteresis, non- | 0.05 ... 1.00 m/s:±(1% of mv+0.05 m/s) |
| linearity and repeatability) | 0.05 ... 2.00 m/s:±(1% of mv+0.1 m/s) |
| 0.1 ... 10.00m/s:±(1% of mv+0.2 m/s) | |
| Uncertainty of factory calibration | ±1% |
| Installation angle effect | <3 % mv for α <10° |
| Temp. influence | 0.2% / °C |
| Electrical data | |
| Supply voltage | DC 24 V ±10% |
| Current consumption | 110 mA |
| Outputs | |
| Output signal | 4 ... 20 mA / 0 ... 10 V (Select when order) |
| Signal wire | 3-wire |
| Relay output | Max current 6A |
| Max voltage : DC 24 V (DC 36 V Max) | |
| Communication | RS485 Modbus RTU |
| RS-485 baud rate | 9600 , 19200 , 38400 , 57600 , 115200 bps |
| Load resistance | Current output:≦ 500 Ω |
| Voltage output:≧ 10 KΩ | |
| Response time | t90<5 sec |
| Warm-up time | < 60sec |
| Operating environment | |
| Meduim | Air |
| Operating Humid. [%RH] | 20..90 (Non-condensing) |
| Operating Temp. [°C] | 0..50°C |
| Storage temperature [°C] | -25..60 |
| Operating pressure | 16bar (Duct type ø12) |
| 2 bar (Duct type ø8 / Remote type ø8) | |
| Protection | |
| IP rating | IP65 (Housing) ; IP20 (Probe) |
| Electrical protection | Polarity protection , Overvoltage |
| Mechanical data | |
| Housing material | Aluminum alloy / Plastic |
| Probe material | SUS304 |
| Probe head | PC with glass fiber |
| Mounting | Duct mounting , 1/2" PT movable thread |
| Weight [g] | Duct type : 440g |
| Remote type (2 m cable) : 525g | |
| Connection type | M12 8P connector |
| Displays | |
| LCD Display | 2" LCD color screen |
| Display readout | -99.99 ... +99.99 (Air velocity) |
| 0 ... 99999 (Air volume) | |
| Decimal point | Button |
| Sampling time | 1 cycle/sec |
| Flow unit | m/s, ft/s, L/min, m³/min, m³/h |
| Certification | |
| Certification | CE |
ลักษณะการนำไปใช้งาน
เซนเซอร์วัดค่าความเร็วลมและอัตราการไหลของลม FDM06-L จากแบรนด์ EYC-TECH ซึ่งเป็นผู้ผลิตที่มีประสบการณ์และความเชี่ยวชาญอย่างยาวนานในการผลิตเซนเซอร์สำหรับระบบระบายอากาศภายในอาคาร โรงงาน , ระบบอัดอากาศ , กระบวนที่มีการใช้อากาศในการควบคุมหรือผลิต
FDM06-L Series เซนเซอร์วัดความเร็วลมที่ออกแบบมาเฉพาะสำหรับงานวัดความเร็วลมที่ต่ำมาก โดยช่วงการวัดจะอยู่ที่ 0.1-10 m/s มีค่าความแม่นยำสูงถึง ± 1.0% F.S. และสามารถวัดอัตราการไหลได้แบบสองทิศทาง (bi-direction) โดยเซนเซอร์วัดความเร็วลมที่ย่านต่ำขนาดนี้ถูกออกแบบมาให้ใช้กับการวัดและควบคุมการไหลเวียนของอากาศแบบลามินาร์ (Laminar Flow Control) ซึ่งใช้กับห้องคลีนรูม ห้องผ่าตัด ห้องปลอดเชื้อหรือห้องปฏิบัติการที่มีการควบคุมการไหลเวียนของอากาศซึ่งจะมีอากาศไหลเวียนเข้ามาในห้องน้อยมาก และจำเป็นต้องควบคุมการไหลของอากาศอย่างเป็นระบบ ความเร็วลมจะต้องนิ่งตามค่ามาตรฐานในการนำห้องควบคุมหรือตู้ปลอดเชื้อนั้นไปใช้งาน เป็นต้น
FDM06-L Series นั้นออกแบบมาให้ง่ายต่อการติดตั้งมีชนิดให้เลือก 3 แบบด้วยกันคือ Duct Type , Laminar Type และ Overflow Type ซึ่งสามารถเลือกให้เหมาะสมกับการใช้งานและติดตั้งได้ทันที คุณสมบัติเด่นของรุ่นนี้คือ
นิยมนำไปใช้งาน อาทิ เช่น อุตสาหกรรมอาหารและยา , ห้องคลีนรูม , ห้องปลอดเชื้อ , ห้องผ่าตัด , ตู้ปลอดเชื้อ เป็นต้น
___________________________________________________________________________________
FDM06-L Series DATASHEET Download
____________________________________________________________________________________________________
Manual Download
____________________________________________________________________________________________________
Modbus register Download
____________________________________________________________________________________________________